Pack(8) Injector Puller Seal Installer Tools for BMW N14 N18 N54 130192 130195
Specifications
| Return Shipping Will Be Paid By | Buyer |
| Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | carpopart |
| Type | Injector Puller |
| Set Or Single Item | Set |
| Net Weight | 923g |
| Shell Color | Black |
| Material | Steel |
| Dimension | 128mm/5.04" |
Part number: 130195, 130192, 130193, 130194FitmentFor BMW N14, N18, N54 and N63 engineFor BMW 335i, 335xi, X5 3.0L 2007-2010For BMW 135is, 535i, 535xi, X5 3.0 2008-2010For BMW 750i, 750Li 2009-2013For BMW 550i GT 2010-2013For Mini Cooper N14 engine 2007-2012Specification:Color: BlackMaterial: MetalLong bolt: Length 128mm/5.04"Short bolt: Length 80mm/3.15"Other size: Check detail on pictureThis is a non-OEM product, accessory only!Package2x Puller1x Adapter1x Sliding Hammer2x Calibration Sleeve1x Assembly Sleeve1x Assembly ConeHow to remove the Injector:Assemble the tool and screw the adapter on the top of the injector.Shake up and down to pull the sliding hammer.Drag out the tool and injector when they are loose.How to Install the Seal:Take out the old seal ring and slide new seal ring on assembly cone, then install it on injector tip.Push the seal ring in injector groove with the installer.Put the calibration sleeve on seal and compress it back to the correct OD, so that to install on ylinder head.Convenient HelperStrong duty metal to wear resistant, shatterproof, not easy broke or rupture, impact resistance.Braided pattern on sleeve sets for anti slip, withstand long time multiple usingNotifictiaonPlease note the seal must be replaced whenever they are removed from the cylinder head, or it may damage the cylinder head.Please use accurate tool to remove fuel injector or it may get damaged and face fuel consumption.This is non-OEM product, accessory only! Pack(8) Injector Puller Seal Installer Tools for BMW N14 N18 N54 130192 130195 Part number: 130195, 130192, 130193, 130194 FitmentFor BMW N14, N18, N54 and N63 engineFor BMW 335i, 335xi, X5 3.0L 2007-2010For BMW 135is, 535i, 535xi, X5 3.0 2008-2010For BMW 750i, 750Li 2009-2013For BMW 550i GT 2010-2013For Mini Cooper N14 engine 2007-2012Specification:Color: BlackMaterial: MetalLong bolt: Length 128mm/5.04"Short bolt: Length 80mm/3.15"Other size: Check detail on pictureThis is a non-OEM product, accessory only!Package2x Puller1x Adapter1x Sliding Hammer2x Calibration Sleeve1x Assembly Sleeve1x Assembly ConeHow to remove the Injector:Assemble the tool and screw the adapter on the top of the injector.Shake up and down to pull the sliding hammer.Drag out the tool and injector when they are loose.How to Install the Seal:Take out the old seal ring and slide new seal ring on assembly cone, then install it on injector tip.Push the seal ring in injector groove with the installer.Put the calibration sleeve on seal and compress it back to the correct OD, so that to install on ylinder head.Convenient HelperStrong duty metal to wear resistant, shatterproof, not easy broke or rupture, impact resistance.Braided pattern on sleeve sets for anti slip, withstand long time multiple usingNotifictiaonPlease note the seal must be replaced whenever they are removed from the cylinder head, or it may damage the cylinder head.Please use accurate tool to remove fuel injector or it may get damaged and face fuel consumption.This is non-OEM product, accessory only! ITEM SPECIFICS BrandcarpopartManufacturer Part Number130192/130193/130194/130195TypeInjector PullerSet or Single ItemSetNumber of Pieces8Product NameInjector Puller and Seal InstallerNet Weight923gShell ColorBlackMaterialSteelDimension128mm/5.04"upc766549344950 YOU SHOULD KNOW If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay! ABOUT USSHIPPING POLICYPAYMENTRETURNCONTACT US carpopart is based in United States, selling aftermarket automotive parts and accessories. We believe in FACTORY DIRECT purchases. Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock. We are proud to have served over 500,000 eBay buyers worldwide. International Buyers - Please Note: Taxes and charges are not included in the item price or shipping charges.Buyers are responsible for these charges. Note that delivery times may vary, particularly during peak periods or in climate weather conditions. All items will be dispatched from our warehouse in Kentucky directly. We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery. All our items will be shipped to buyer's address, please confirm your address on eBay before you bid. Payment Methods: We accept eBay payment. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. We offer a 30 day return policy. This is under the following conditions: The item must be unused and in a resalable condition otherwise are not eligible for a refund. All items returned by post are returned at your expense, we cannot be held responsible for this. Please use a traceable service. Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. If no response for you within 48 hours, please check the spam / junk folder in your mail box. DescriptionPolicy Pack(8) Injector Puller Seal Installer Tools for BMW N14 N18 N54 130192 130195 Part number: 130195, 130192, 130193, 130194 FitmentFor BMW N14, N18, N54 and N63 engineFor BMW 335i, 335xi, X5 3.0L 2007-2010For BMW 135is, 535i, 535xi, X5 3.0 2008-2010For BMW 750i, 750Li 2009-2013For BMW 550i GT 2010-2013For Mini Cooper N14 engine 2007-2012Specification:Color: BlackMaterial: MetalLong bolt: Length 128mm/5.04"Short bolt: Length 80mm/3.15"Other size: Check detail on pictureThis is a non-OEM product, accessory only!Package2x Puller1x Adapter1x Sliding Hammer2x Calibration Sleeve1x Assembly Sleeve1x Assembly ConeHow to remove the Injector:Assemble the tool and screw the adapter on the top of the injector.Shake up and down to pull the sliding hammer.Drag out the tool and injector when they are loose.How to Install the Seal:Take out the old seal ring and slide new seal ring on assembly cone, then install it on injector tip.Push the seal ring in injector groove with the installer.Put the calibration sleeve on seal and compress it back to the correct OD, so that to install on ylinder head.Convenient HelperStrong duty metal to wear resistant, shatterproof, not easy broke or rupture, impact resistance.Braided pattern on sleeve sets for anti slip, withstand long time multiple usingNotifictiaonPlease note the seal must be replaced whenever they are removed from the cylinder head, or it may damage the cylinder head.Please use accurate tool to remove fuel injector or it may get damaged and face fuel consumption.This is non-OEM product, accessory only! ITEM SPECIFICS BrandcarpopartManufacturer Part Number130192/130193/130194/130195TypeInjector PullerSet or Single ItemSetNumber of Pieces8Product NameInjector Puller and Seal InstallerNet Weight923gShell ColorBlackMaterialSteelDimension128mm/5.04"upc766549344950 YOU SHOULD KNOW If you have any questions, please feel free to contact our customer service. Our response will be faster than eBay! ABOUT US carpopart is based in United States, selling aftermarket automotive parts and accessories. We believe in FACTORY DIRECT purchases. Our mission is to deliver Lower Prices and Better Quality to consumers and distributors wherever, whenever. We strive to ensure that our products are reliable, updated and that our transactions are smooth and speedy. We are positioned to bring you the latest consumer automotive aftermarket parts and accessories globally and round the clock. We are proud to have served over 500,000 eBay buyers worldwide. SHIPPING POLICY International Buyers - Please Note: Taxes and charges are not included in the item price or shipping charges.Buyers are responsible for these charges. Note that delivery times may vary, particularly during peak periods or in climate weather conditions. All items will be dispatched from our warehouse in Kentucky directly. We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery. All our items will be shipped to buyer's address, please confirm your address on eBay before you bid. PAYMENT Payment Methods: We accept eBay payment. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. RETURN We offer a 30 day return policy. This is under the following conditions: The item must be unused and in a resalable condition otherwise are not eligible for a refund. All items returned by post are returned at your expense, we cannot be held responsible for this. Please use a traceable service. CONTACT US Please email us to resolve any problem before you leave any feedback to us. We will reply you via email ASAP, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. If no response for you within 48 hours, please check the spam / junk folder in your mail box.
