5pcs Spindle Nut Sockets Kit Axle Hub Nut Socket For Ford Dana 50/60, 1/2″ Drive
FeaturesAPPLICATION — Heavy Duty spindle nut sockets set for Ford Dana 50 / 60 , For Chevrolet/ GMC, For Dodge, etc. Suitable for most common variants of spindle nuts found on current passenger vehicles. Sockets have 1/2″ square drive, allowing use with a torque wrench, ratchet, or breaker bar.5 PIECE — Set contains 5 of the most popular sized spindle nut sockets. 2-3/4″ x 4 Lug Outer Spindle Nut Socket, 2-5/8″ x 6 lug Outer Spindle Nut Socket, 2-3/8″ x 4 lug Outer Spindle Nut Socket, 2-1/2″ x 4 lug Inner Spindle Nut Socket, 2-1/4″ x 4 lug Inner Spindle Nut Socket.HIGH-QUALITY STEEL MATERIAL — Forged from heat-treated impact quality steel for long tool life. Long lasting durability heavy duty coating used on sockets to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.1/2” DRIVE — Drive sockets with a 1/2 inch square drive impact wrench or hand tighten. Special design holds onto nuts and prevents any rounding off corners.SATISFACTION GUARANTEE — If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying! Molded Storage CaseComes with molded storage case for convenient storage.Heat-Treated Impact SocketsForged from heat-treated impact quality steel for long tool life.Corrosion-resistant, wear-resistant, and rust-resistant.Lug Out Spindle SocketsSet contains 5 of the most popular sized spindle nut sockets.Special design holds onto nuts and prevents any rounding off corners.1/2 Inch DriveSockets have 1/2″ square drive, allowing use with a torque wrench, ratchet, or breaker bar.2-3/8″ x 4 lug OuterFor Chevrolet/ GMC: 1/2-ton Pickup, Blazer and Jimmy. For Ford: Bronco,Bronco ll, Ranger, Explorer 1/2- and3/4-ton F-Series Pickup w/spline-type hub. For International: 1100 series, For Dodge: 1/2-ton Pickupand Ramcharger.2-5/8″ x 6 lug Outer3/4 and 1-ton for Ford Pickup for Bronco 1978 and newer. 3/4 and 1-ton for GMC and For Chevrolet Pickups 1973 and newer.2-1/4″ x 4 lug InnerFor Chevrolet/GMC: 1/2-ton Pickup, Blazer and Jimmy.2-3/4″ x 4 Lug OuterFor Ford 1985 and newer F250/350 2WD rear axles with»high shear» type rotating locknut.2-1/2″ x 4 lug InnerFor Ford F250/350 with heavy duty axles 1985 and newer; For Ford F350 (late models) with Dana 50 or 60 axle For Chevrolet and GMc 30 Series 1987 only; for Chevrolet and GMC w/ Dana 50 independent front suspension; For Chevrolet and GMC with Dana 60 with monobeamfront suspension.
Leer más10803 Yoke Puller Tool Heavy Duty For Semi Trucks, Class 6-8 Trucks & Equipment
Will fit full and half round yokes. Bulit with precision and quality in mind. Made of superior material (high-grade steel) which have an unparalleled lifespan with great durability. The pull bar is precisely milled with a chamfer to prolong the life of the forcing screw.
Leer másJ-38587-A Engine Barring Socket Turning Tool Alt. for CAT 3200/3406/C13/C15/C16
FeaturesAPPLICATION — J-38587-A Engine Barring Socket Alt. for Caterpillar CAT 3200/3406 Series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI & Mack E-7, E-7 ETECMATERIAL — Durable steel. One piece solid construction. Black finish.A MUST HAVE — Alternative to Caterpillar 9S9082.EASY TO USE — Operation was a breeze! Engine turning tool meshes great with every tooth on the flywheel, perfectly help you save energy to rotate the engine.SATISFACTION GUARANTEE — If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!REPLACE OEMAlternative to Caterpillar 9S9082.Quality Steel.Easy to use.This tool’s load-bearing collar provides friction-free operation while rotating the tool in the housing.Engine Barring SocketAPPLICATIONWorks on Caterpillar CAT 3200/3406 Series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI & Mack E-7, E-7 ETECFUNCTIONEngine turning tool meshes great with every tooth on the flywheel, perfectly help you save energy to rotate the engine.Engine-Barring Tool makes it easy to rotate an Engine!Being annoy of manually rotating an engine? Then you need our Engine Barring Socket! Easy to use.This tool’s load-bearing collar provides friction-free operation while rotating the tool in the housing. Works Great on the subject engine.One person job:Worked great, was able to pin flywheel without the help of another person.Great hand tool for turning over engine:Making adjusting injectors and valve lash easier.Package Includes:1* Engine Barring Socket
Leer másJ-46392 Engine Barring Tool for Detroit Diesel DD13, DD15, DD16, MBE4000, MBE900
APPLICATION — Used with 1/2″ drive wrench. OEM QUALITY — Comparable to the J-46392, W904589046300, W470589046300 Engine Barring Tool. No worry about buying!
Leer másImpact Socket Set 27 PCs 3/4″ Drive 6 Point SAE 7/8″-2″, Metric 22 to 50 mm
FeaturesAPPLICATION — The 27 Pcs 3/4-Inch Drive SAE and Metric Impact Socket Set Suitable for working on trailers, trucks, tractors, heavy equipment and large machinery, big service and repair jobs that need the 3/4″-inch Drive Socket Set.FUNCTION — This Impact Socket Set with adapters and ratchet handle is perfect for removing and installing wheel lug nuts, particularly suitable for most trucks, RVs, and other heavy-duty vehicles. Precisely machined impact socket set provides extreme levels of torque changes.6-POINT SOCKET — 6-point, high-torque design that contacts and grips the stronger flat sides of nut or bolt head, not the weaker corners, prevents any rounding off corners. This means your fasteners are protected and so are your sockets.FEATURES — Standard Impact Sockets. Drive Size: 3/4″, Measurement Standard: SAE and Metric, Flank Type: 6-Point, Color: Black. Package quantity: 27 PiecesPACKAGE CONTENT — 27 Pieces Impact Socket Set includes: 12 x standard SAE sockets: 7/8″, 15/16″, 1″, 1 1/8″, 1 3/16″, 1 5/16″, 1 3/8″, 1 7/16″, 1 5/8″, 1 3/4″, 1 7/8″, and 2″. 10 x Metric sockets: 22 mm, 24 mm, 27 mm, 30 mm, 32 mm, 36 mm, 38 mm, 41 mm, 46 mm, and 50 mm. 2 x Extension Bars (4″ and 8″), 1 x 18-inch Sliding T Bar, 1 x 18-inch hand ratchet bar. 1 x Carrying Case.TOP QUALITY — Manufactured from heat-treated Chromium-vanadium steel CrV steel for superior performance. Long lasting durability heavy duty coating used on sockets to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.SATISFACTION GUARANTEE — If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
Leer más