Universal 2 Way Oil Filter Wrench 3 Jaw Adjustable Oil Filter Removal Tool 1/2″
Heavy Duty Fully Adjustable Universal Oil Filter Wrench!Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In. Ratchet. The Compact, Low Profile Design Allows This Filter Wrench To Grip Better In Tight Areas. Can Be Used With Most Makes Including But Not Limited To:Acura, Audi , Bmw , Buick , Cadillac, Chevrolet, Chrysler , Dodge, Ford, General Motors, Gmc, Honda, Hummer, Hyundai, Infiniti , Isuzu , Jaguar , Jeep, Land Rover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mitsubishi, Nissan, Oldsmobile, Peugeot, Pontiac, Porsche, Saab, Saturn, Subaru, Suzuki, Toyota, Vw, Kia, Volvo Specs:• Use On All 2-3/8” To 5” (60-127mm) Diameter Oil Filters• Hardened Carbon Steel• Durable Industrial Chrome Plate• Steel Jaws Provide A Non-Slip Tight Grip• 3/8 Square Drive Opening With 1/2” Adapter• Low Profile For Tight Spaces• Includes Adjustable Wrench And 3/8/-1/2 Adapter• (Ratchets Or Sockets Are For Demonstration Only And Not Included) Feature:Wide Application -Use On All 2-3/8” To 5” (60-120mm) Diameter Oil Filters. Fits 1/2 And 3/8 Inch Square Drive Ratchet Or 7/8 Inch Wrench In All Kinds Of Vehicles.Special Design – The Oil Filter Wrench Is Specially Designed With Three Jaws. These Three Jaws Will Catch The Filter More Tightly.Function Type -The Oil Filter Wrench Is A Universal Tool To Remove The Filters On Your Vehicles. Sometimes The Filters Are Very Tough. Then You Need A Oil Filter To Make Your Work Easy.Easy To Use – This Oil Filter Wrench Is Used To Remove The Oil Filter From Cars And Trucks. It Is Adjustable Simply Adjust It On The Filter By Turning It Then With A Ratchet Loose It Up. Package Include:1pcs 3 Claw Oil Filter Wench
Leer másUniversal Heavy Duty 2 Way Oil Filter Wrench Remover Tool Fully Adjustable 3 Jaw
Heavy Duty Fully Adjustable Universal Oil Filter Wrench! Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In.
Leer másUniversal 2-Way Oil Filter Wrench 3 Jaw Adjustable Oil 2 Way 3 Jaw Removal Tool
Heavy Duty Fully Adjustable Universal Oil Filter Wrench! Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In.
Leer más2-Way 3 Jaw Oil Filter Wrench Adjustable Oil Filter Removal Tool 1/2″ Universal
Heavy Duty Fully Adjustable Universal Oil Filter Wrench! Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In.
Leer másUniversal 2-Way Oil Filter Wrench 3 Jaw Adjustable Oil Filter Removal Tool 1/2″
Heavy Duty Fully Adjustable Universal Oil Filter Wrench!Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In. Ratchet. The Compact, Low Profile Design Allows This Filter Wrench To Grip Better In Tight Areas. Can Be Used With Most Makes Including But Not Limited To:Acura, Audi , Bmw , Buick , Cadillac, Chevrolet, Chrysler , Dodge, Ford, General Motors, Gmc, Honda, Hummer, Hyundai, Infiniti , Isuzu , Jaguar , Jeep, Land Rover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mitsubishi, Nissan, Oldsmobile, Peugeot, Pontiac, Porsche, Saab, Saturn, Subaru, Suzuki, Toyota, Vw, Kia, Volvo Specs:• Use On All 2-3/8” To 5” (60-127mm) Diameter Oil Filters• Hardened Carbon Steel• Durable Industrial Chrome Plate• Steel Jaws Provide A Non-Slip Tight Grip• 3/8 Square Drive Opening With 1/2” Adapter• Low Profile For Tight Spaces• Includes Adjustable Wrench And 3/8/-1/2 Adapter• (Ratchets Or Sockets Are For Demonstration Only And Not Included) Feature:Wide Application -Use On All 2-3/8” To 5” (60-120mm) Diameter Oil Filters. Fits 1/2 And 3/8 Inch Square Drive Ratchet Or 7/8 Inch Wrench In All Kinds Of Vehicles.Special Design – The Oil Filter Wrench Is Specially Designed With Three Jaws. These Three Jaws Will Catch The Filter More Tightly.Function Type -The Oil Filter Wrench Is A Universal Tool To Remove The Filters On Your Vehicles. Sometimes The Filters Are Very Tough. Then You Need A Oil Filter To Make Your Work Easy.Easy To Use – This Oil Filter Wrench Is Used To Remove The Oil Filter From Cars And Trucks. It Is Adjustable Simply Adjust It On The Filter By Turning It Then With A Ratchet Loose It Up. Package Include:1pcs 3 Claw Oil Filter Wench
Leer másHeavy Duty Oil Filter Removal Tool 3-Jaw Non-Slip Grip 2-Way w/Adapter for Cars
Easy To Use – This Oil Filter Wrench Is Used To Remove The Oil Filter From Cars And Trucks. It Is Adjustable Simply Adjust It On The Filter By Turning It Then With A Ratchet Loose It Up. Three Jaws Made From Heat-Treated Carbon Steel And Finished With A Durable Silver Oxide, Grasp Filters Tightly As You Apply Pressure With A 1/2 In And 3/8 In.
Leer más5046 & 1338 Front Crankshaft Seal Installation Tool for Cummins 3.9L 5.9L 6.7L
APPLICATION: Fits for 1989-Current Cummins 3.9L 5.9L 6.7L. Will fit Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L. FUNCTION: This kit is designed to installs seal numbers 3937111, 3904353 and the seal & wear sleeve kit 3802820. BENEFITS: Made to properly place the crankshaft seal without leaks. Help to properly press the wear seal into place evenly. ( NOTE: Installing the seal uneven can cause leaks prematurely, make sure the job is done right with this installation tool.) ALTERNATIVE TO: .
Leer másDisc Brake Pad Calliper Piston Rewind Separation Tool Handed Car Wheel Cylinder
Auto Brake Piston Rewind Tool Right Handed Thread Drive Dual Pin Head Calipers. Brake piston rewind tool. For use on disc brake calipers fitted to most cars with right handed thread. 1 Repair Tool.
Leer másBrake Pad Calliper Piston Separation Handed Set Wind Back Wheel Cylinder Tool
Features Brake piston rewind tool. For use on disc brake calipers fitted to most cars with right handed thread. Complete with reaction plate and reversible 3/8″ drive dual pin head. Specifications Color: silver + black Material: metal Package size: approx. 21 * 12 * 5cm / 8.3 * 4.7 * 2in Package weight: approx. 690g / 24oz Package List 1 * Repair Tool We accept payment by PayPal only ! Payment should be completed within 7 days after buyer places the order,or else an unpaid case will be opened in order to cancel the transaction. If you can not pay in time, please contact us. eCHECK from PayPal will only be processed once the payment clears. All of the items will be shipped to buyer’s EBAY address,please confirm your address on Ebay before you buy.Your order will be usually shipped out the same or next business days once the payment is made and cleared. All items will be checked before packing. All items are new and of high quality. Item will be shipped within 1 business days upon receipt of payment, excluding weekends and public holidays. If to USA,we will ship your order by USPS,it will take about 7-10 working days to you,and you can track it on line. If to other country,we will ship your order by China Post or Singapore Registered Air Mail,it will take about 14-21 working days to you,you aslo can track it on line. Delivery time is about 14-28 business days and it may take up to 8 weeks to some European countries and South American countries due to strict custom inspection. We ship worldwide. Shipping fee include packing, warehouse, distribution, order handling and processing costs. We offer combined shipping discount on Shipping & Handling. Please note that some countries will have custom duty or tax for certain items. It is the buyer’s responsibility to pay all endued custom duty or tax. We are not responsible for any custom duty or tax since our price do not include this charge. 30-day Warranty with Exchange for defective, malfunctioned, incorrect or parts-missing items. Please notify us and return the item with all parts and accessories packed and marked «FOR EXCHANGE» within 14 days of receipt. If defective, malfunctioned or parts-missing items are no longer available, a refund may be issued. All returning postage costs will be the responsibility of the buyers under all circumstances. If you encounter any problems about anything, please feel free to contact us and we will do our best to assist you solve the issue. If you are not satisfied in anyway, please feel free to let us know and give us a second chance to correct it before you decide to leave any neutral or negative feedback. Please contact us through eBay link if you have any questions. We will reply you within 24- 48 hours. Please check you spam mail if no response for 48 hours.
Leer másEngine Turning Barring Tool for Mack E-7 ETEC Engine 3508/3512/3500 EUI 9S9082
For Mack E7/E-7 ETEC Engine. Type:Engine Barring Socket. The engine turning tool engages perfectly with every tooth on the flywheel, saving energy to the engine. 4Pcs Connecting Rods Conrod For Mazda MZR 2.3 Engine ARP 2000 154.8mm.
Leer más