KTC B4-9/16, 1/2in Sq. Socket Standard (6Pt.), 9/16in
Uses a power fit shape that prevents stress from concentrating on the bore and insertion angle to prevent damage to the edges of bolts and nuts, allowing for more reliable tightening and loosening work.
Leer másKTC UD7-10 Standard Combination Hammer Size 1lb. 12.4 inches Length
We will do our best to satisfy you. these are our policy. ・Reasonable Price. Our office is located in Japan. Our office is located in Japan, the most prosperous place in Japan.
Leer másKTC BT4-1/4, 1/2in Sq. Hex. Bit Socket, 1/4in
1/2in Sq. Hex. Bit Socket, 1/4in
Leer másKTC BT4-1/4L, 1/2in Sq. Long Hex. Bit Socket, 1/4in
1/2in Sq. Long Hex. Bit Socket, 1/4in
Leer másKTC B4-1-1/4W, 1/2in Sq. Socket Standard (12Pt.), 1-1/4in
Uses a power fit shape that prevents stress from concentrating on the bore and insertion angle to prevent damage to the edges of bolts and nuts, allowing for more reliable tightening and loosening work.
Leer másKTC B4-1-1/4, 1/2in Sq. Socket Standard (6Pt.), 1-1/4in
Uses a power fit shape that prevents stress from concentrating on the bore and insertion angle to prevent damage to the edges of bolts and nuts, allowing for more reliable tightening and loosening work.
Leer másKTC EHB315, 3/8in Sq. Socket Holder (15 Clips), 1pc
●By changing the shape of the holder, it is easier to attach and detach the socket than our conventional products, and the socket holding power has also been increased. (Difficult to come off when carrying) ●Holder coloring is set for each insertion angle. 6.3sq. and 12.7sq. clips ( EHB27 and ( EHB45 )) can also be used.
Leer másKTC B3-3/8, 3/8in Sq. Socket Standard (6Pt.), 3/8in
Uses a power fit shape that prevents stress from concentrating on the bore and insertion angle to prevent damage to the edges of bolts and nuts, allowing for more reliable tightening and loosening work.
Leer másKTC B6L-40W, 3/4in Deep Socket (12Pt.), 40mm
3/4in Deep Socket (12Pt.), 40mm
Leer másKTC B3-5/8, 3/8in Sq. Socket Standard (6Pt.), 5/8in
Uses a power fit shape that prevents stress from concentrating on the bore and insertion angle to prevent damage to the edges of bolts and nuts, allowing for more reliable tightening and loosening work.
Leer más