This is a 3D Printed Oil Filter Wrench / Funnel designed for Black Tokyo Roki oil filters that are commonly used on Subaru EJ series motors. Was designed specifically for Subaru EJ series motors that have the oil filter equipped upside down and under the vehicle. May work for other applications but please verify your oil filter diameter. Designed to fit Oil Filter part numbers: Subaru 15208AA100 or Mazda N3R114302 Funnel Colors Available: Black or Blue The mount / drain is used to store the funnel when not in use and allow any oil to drain out of the funnel. A lid is also provided to keep the inside of the funnel from collecting debris. The mount uses 4 very strong magnets to attach the unit to a metal structure or cabinet. You will need to source a 12oz Gatorade bottle to collect the dirty oil. NOT INCLUDED: «Mini» 12oz Gatorade bottle for drain collection Changing the oil on vehicles equipped with upside down oil filters can be a very messy task. The tools currently available on the market don’t have a way of containing the mess and keeping the technician clean. Can also be used as a funnel. The bottom of the wrench is designed to thread perfectly into your oil fill cap to provide easy no-spill filling. When the jobs complete, use the wrench to funnel your old oil into your oil quarts to give clean transportation for disposal. Due to the manufacture process the product will have a texture and layer lines visible with small surface blemishes possible. Specific FeaturesDesigned specifically for the Subaru EJ engine.Designed to work with Subaru OEM 14 flute oil filters. May work with other brands, but have not tested. Message me if you are unsure.The tool acts as a general funnel as well.The tool fits into most quart sized oil containers to drain the old oil back into for disposal.The tool thread perfectly into all Subaru oil filler necks to provide easy oil filling. Mount/Drain attaches to metal surface via magnetsStores the Funnel when not in useAllows the funnel to drain excess oilThreads a 12oz Gatorade bottle for collection

This is a 3D Printed Oil Filter Wrench / Funnel designed for Subaru OEM oil filters*. Used to aid in the oil change process. Was designed specifically for Subaru EJ series motors that have the oil filter equipped upside down and under the vehicle. May work for other applications or aftermarket filters but please verify your oil filter diameter against Subaru OEM part numbers below. Subaru Oil Filter part number for reference: 15208AA12A OR 15208AA15A *NOTE: Subaru has changed their supplier for OEM blue filters. Be sure to check the part number on your filter matches the above Changing the oil on vehicles equipped with upside down oil filters can be a very messy task. The tools currently available on the market don’t have a way of containing the mess and keeping the technician clean. Can also be used as a funnel. The bottom of the wrench is designed to thread perfectly into your oil fill cap to provide easy no-spill filling. When the jobs complete, use the funnel to load your old oil into your oil quarts to give clean transportation for disposal. Due to the manufacture process the product will have a texture and layer lines visible with small surface blemishes possible. Options: Pick a color – Black or BlueMount/Drain – See note below If you select the the Option: Mount / Drain, You will also receive a mount and lid, that is used to store the funnel when not in use and allow any oil to drain out of the funnel. The lid helps keep the inside of the funnel from collecting debris, no reason to clean out the funnel anymore. Just pop it back in the mount and be done. The mount uses 4 very strong magnets to attach the unit to a metal structure or cabinet. You will need to source a 12oz Gatorade bottle to collect the dirty oil. NOT INCLUDED: «Mini» 12oz Gatorade bottle for drain collection Specific FeaturesDesigned specifically for the Subaru EJ engine.Designed to work with Subaru OEM 14 flute oil filters. May work with other brands, but have not tested. The tool acts as a general funnel as well.The tool fits into most quart sized oil containers to drain the old oil back into for disposal.The tool thread perfectly into all Subaru oil filler necks to provide easy oil filling. Mount/Drain attaches to metal surface via magnetsStores the Funnel when not in useAllows the funnel to drain excess oilThreads a 12oz Gatorade bottle for collection

This is a 3D Printed Oil Filter Wrench / Funnel designed to fit Honda Oil Filter, Part # 15400-PLM-AO2, commonly on Honda Accord | Civic | CR-V | Fit | Odyssey | Passport | Pilot | RidgelineNote: It may work with other oil filters but I can only guarantee fitment on the above OEM part number The funnel provides a no mess oil change and has the added feature of threading into the oil fill cap to use as a funnel for filling. Break the oil filter free by normal methods, slide the funnel on and continue to un-thread and let the oil drain without the mess on your hands. Funnel Colors Available: Black or Blue (If You Pick the Option) for the mount / drain, it is used to store the funnel when not in use and allow any oil to drain out of the funnel. A lid is also provided to keep the inside of the funnel from collecting debris. The mount uses 4 very strong magnets to attach the unit to a metal structure or cabinet. You will need to source a 12oz Gatorade bottle to collect the dirty oil. Not Included: «Mini» 12oz Gatorade bottle for drain collection – Mount/Drain attaches to metal surface via magnets — Stores the Funnel when not in use — Allows the funnel to drain excess oil — Threads a 12oz Gatorade bottle for collection Due to the manufacture process the product will have a texture and layer lines visible with small surface blemishes possible.