US PRO IMPACT SOCKET ADAPTOR 3/4″ F TO 1/2″ M STEP DOWN FEMALE MALE CONVERTER
An impact adaptor made from strong Chromium Molybdenum steel and hardened to HRC 45-47. For converting a 3/4″ drive to a 1/2″ drive. Comes with a sprung locking ball to ensure a secure fit for attaching the socket. Length of the socket is 57mm.
Leer másUSPRO 52MM HUB NUT SOCKET 1/2″ DRIVE 6PT THIN WALL LAND ROVER DISCOVERY DEFENDER
A professional quality thin walled impact socket, essential for working on nuts with limited access such as hub nuts. Suitable for hub nuts found on Land Rover Classic (after 1970), Defender (83-), Discovery, Toyota, Volvo. Please check the size required as sizes vary according to model. Forged from toughened Chrome Molybdenum Steel (Cr-Mo) for increased durability and longevity. Black phosphate coating for protection against corrosion. Hardened and tempered for enhanced durability. • Size: 52mm • Points: 6 • Drive: 1/2″ • Total length of socket: 78mm • Outside diameter of socket end: 73mm • Outside diameter of drive end: 58mm • Wall thickness: 6mm • Style: Euro • Material: 42 CR-MO for strength • Hardened: HRC 45 for durability.
Leer másUS PRO INDUSTRIAL 1/2″ INCH DRIVE H19 19MM IMPACT HEX BIT SOCKET ALLEN KEY TOOL
A professional quality 19mm impact hex bit socket. Perfect for VAG hub nut bolts. Manufactured from Chrome Molybdenum Steel (Cr-Mo) for longevity and durability and helps resist abrasion, oxidation and corrosion. Hardened HRC50-53 steel for greater toughness and wear resistance. Black Phosphate finish gives additional protection agains corrosion. Total length is 78mm.
Leer másUS PRO INDUSTRIAL 1/2″ INCH DRIVE H10 10MM IMPACT HEX BIT SOCKET ALLEN KEY TOOL
A professional quality 10mm impact hex bit socket. Manufactured from Chrome Vanadium Steel (CR-V) for longevity and durability and helps resist abrasion, oxidation and corrosion. Premium S2 impacted steel for greater toughness and wear resistance. Black Phosphate coated finish gives additional protection agains corrosion. Total length is 55mm.
Leer másUSPRO 6PC 1/4″ INCH DRIVE WOBBLE EXTENSION BAR SET EXTRA LONG WRENCH SOCKET TOOL
Professional quality SIX piece wobble extension bar set with 1/4″ drive. Manufactured from Chrome Vanadium Steel (CR-V) for longevity and durability and helps resist abrasion, oxidation and corrosion. They allow you to access hard to reach places that a standard socket will not. The rounded drive at the end of the bar gives flexibility between the extension and the socket, enabling socket access in difficult to reach areas. High gloss, mirrored finish with a knurled section for added grip. Supplied in the following lengths: 32mm, 50mm, 100mm, 150mm, 200mm and 275mm. Supplied in a handy EVA foam tray for neat storage and easy transportation.
Leer másUSPRO INDUSTRIAL 11PC 3/8″ DRIVE IMPACT HEX SOCKET BIT SET H2 – H10 ALLEN KEY
A professional quality set of ELEVEN impact star socket bits with 3/8″ drive. Manufactured from hardened Chrome Vanadium Steel (CR-V) for increased durability and longevity with toughened S2 steel bits. Black Phosphate finish for corrosion resistance. Length of sockets is 48mm and come in sizes H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H9 and H10. Each socket has the size etched on the side for easy identification. Supplied in a plastic tray for neat storage and easy transportation.
Leer másUSPRO 35MM 1/2″ DRIVE 6PT THIN WALL HUB NUT SOCKET FORD BMW HONDA RENAULT NISSAN
A professional quality 35mm thin walled 6Pt impact socket, essential for working on nuts with limited access such as hub nuts. Suitable for hub nuts found on Ford, BMW, Honda, Nissan, Renault, Toyota, Volkswagen, Audi (VAG) and Vauxhall. Please check the size required as sizes vary according to model. Forged from tough Chrome Molybdenum Steel (Cr-Mo) for increased durability and longevity. Black phosphate coating for protection against corrosion. Hardened and tempered for enhanced durability. • Size: 35mm • Points: 6 • Drive: 1/2″ • Total length of socket: 78mm • Outside diameter of socket end: 48mm • Outside diameter of drive end: 38mm • Wall thickness: 3.6mm • Style: Euro • Material: 42 CR-MO for strength • Hardened: HRC 45 for durability.
Leer másUSPRO 5PC 1/2″ DRIVE IMPACT TWIST SOCKET SET DAMAGED NUT BOLT REMOVER EXTRACTOR
A professional quality set of FIVE impact twist sockets with 1/2″ drive. Specially designed for removing rounded nuts bolts and studs. As you turn the socket anti clock wise the spiralled cutting blades grip and remove the damaged nut, bolt or stud. Manufactured from hardened Chrome Molybdenum (Cr-Mo) for exceptional strength, toughness and longevity. Black Phosphate finish for corrosion resistance. The set consists of 17mm, 19mm, 21mm and 22mm sockets and also a 12mm straight bar. Each socket has the size etched on the side for easy identification. Supplied in a handy slide shit carry case for neat storage and easy transportation.
Leer másUSPRO 35MM HUB SOCKET DEEP IMPACT SOCKET 1/2″ INCH DR 6PT CR-MO 6 POINT AXLE NUT
A professional quality 35mm thin walled 6Pt impact socket, essential for working on nuts with limited access such as hub nuts. Suitable for hub nuts found on BMW, Ford, Honda, Nissan, Vauxhall, Renault, Toyota, Volvo, Volkswagen and Audi (VAG). Please check the size required as sizes vary according to model. Forged from tough Chrome Molybdenum Steel (Cr-Mo) for increased durability and longevity. Black phosphate coating for protection against corrosion. Hardened and tempered for enhanced durability. • Size: 35mm • Points: 6 • Drive: 1/2″ • Total length of socket: 78mm • Outside diameter of socket end: 48mm • Outside diameter of drive end: 38mm • Wall thickness: 3.6mm • Style: Euro • Material: 42 CR-MO for strength • Hardened: HRC 45 for durability.
Leer másUSPRO 9PC 1/4″ 3/8″ 1/2″ DRIVE IMPACT EXTENSION BAR SOCKET SET LONG SHORT TOOL
A professional quality, heavy duty set of NINE impact extension bars. Manufactured from Chrome Vanadium Steel (CR-V) for longevity and durability and helps resist abrasion, oxidation and corrosion. Made using heat treated hardened HRC 43-45 steel for added strength. They come in a 1/4″, 3/8″ and 1/2″ drive and can be used with air tools and all kinds of impact tools. The sizes are as follows: 1/4″ Drive bars: 50mm (2″), 100mm (4″) and 150mm (6″). 3/8″ Drive bars: 45mm (1.75″), 75mm (3″) and 150mm (6″). 1/2″ Drive bars: 50mm (2″), 125mm (5″), 250mm (10″). Sizes are laser etched on the side for easy identification. Black oxide finish for corrosion resistance. Supplied in a plastic tray for neat storage and easy transportation.
Leer más