US PRO 17MM IMPACT HEX SOCKET 1/2″ DRIVE 6 POINT 6PT SINGLE CR-V METRIC WRENCH
A professional quality SIX point shallow impact socket for both commercial or occasional use. Manufactured from Chrome Vanadium Steel (Cr-V) and hardened and tempered to HRC 45-48 for increased durability and longevity. Black phosphate finish for greater corrosion resistance for protection. Laser etched size on the body for easy identification. 1/2″ drive with a total length of 38mm. Outside diameter of the socket end is 23mm and the outside diameter of the drive end is 23mm.
Leer másUS PRO INDUSTRIAL M12 12MM IMPACT SPLINE BIT SOCKET LONG REACH 1/2″ INCH DRIVE
A professional quality long M12 (12mm) impact spline bit socket for commercial or occasional use. Manufactured by US.PRO Tools (formerly known as Bergen Tools), one of the more respected hand tool manufacturers on the market. Forged from quality Chrome Molybdenum Steel (Cr-Mo) for increased longevity and durability. It has a 1/2″ drive and total length is 78mm. Laser etched size on the body to allow easy identification. Black oxidised finish for increased resistance to corrosion.
Leer másUS PRO 15PC MAGNETIC METRIC IMPERIAL HEX IMPACT DRILL NUT DRIVER SET 1/4″ DRIVE
A professional quality FIFTEEN piece set of magnetic nut drivers/setters with a 1/4″ hex shank drive. Manufactured from toughened Chronium CR40 steel for increased durability and longevity. Black Phosphate finish for resistance against corrosion. The length of each socket is 65mm and the sizes are etched on the side for easy identification. Drives nuts, bolts, screws and other fixings with a hexagon head. Fitted magnet holds the nut (fixing) in place for quicker installations. The 1/4″ (6.35mm) hex shank allows them to be used with Impact Drills/Drivers with quick release systems or with a suitable chuck. Eight metric drivers: 6, 7, 8, 10, 11, 12, 13 and 14mm. Seven SAE drivers: 1/4″, 9/32″, 5/16″, 3/8″, 7/16″, 1/2″ and 9/16″. All supplied in a handy clip shut carry case for neat storage and easy transportation.
Leer másUS PRO 8PC 1/4″ HEX LONG MAGNETIC IMPACT NUT DRIVER DRILL SOCKET SET 6MM TO 13MM
An EIGHT piece set of long magnetic nut drivers/setters with a 1/4″ hex shank drive. Manufactured by US.PRO Tools (formerly known as Bergen Tools), one of the more respected hand tool manufacturers on the market. Drives nuts, bolts, screws and other fixings with a hexagonal head. The fitted magnet holds the nut (fixing) in place for quicker installations. The 1/4″ hex shank allows them to be used with Impact Drill / Drivers with quick release systems or with a suitable chuck. Manufactured from hardened CR40 steel for durability and longevity. A black phosphate finish for corrosion resistance. • 8 Metric drivers: 6, 7, 8, 9, 10, 11, 12 and 13mm. • Magnetic insert holds the nut in place for quicker installations. • Hardened CR40 with phosphate finish. • For use with all Impact Drill / Drivers. • Universal 1/4″ Hex shank. • Length: 150mm.
Leer másUS PRO INDUSTRIAL 1/2″ INCH DRIVE H14 14MM IMPACT HEX BIT SOCKET ALLEN KEY TOOL
A professional quality 14mm impact hex bit socket. Manufactured by US.PRO Tools (formerly known as Bergen Tools), one of the more respected hand tool manufacturers on the market. Forged from quality Chrome Vanadium Steel (CR-V) for longevity and durability and helps resist abrasion, oxidisation and corrosion. S2 impacted steel for greater toughness and wear resistance. Black Phosphate coated finish gives additional protection agains corrosion. Total length is 55mm.
Leer másUS PRO 6PC EXTRA LONG REACH SCREWDRIVER SET STAR TORX TAMPER MAGNETIC TIP ENDS
A professional quality SIX piece set of extra long reach screwdrivers for commercial or occasional use. They are tamper screwdrivers so not only are they suitable for Torx® products but they are also suitable for torx/star security screws that have the pin in the middle. Manufactured from hardened Chrome Vanadium Steel (CR-V) for strength, durability and longevity. Ergonomically designed double injected handles with cushion grips for added comfort and increased torque. Set includes the following sizes: T10, T15, T20, T25, T27 and T30. Magnetic tips. All the shafts are approx. 250mm in length and the overall length varies from 325mm to 350mm.
Leer másUSPRO OIL GREASE RUBBER SEAL GASKET PULLER O RING HOSE CLIP REMOVER REMOVAL TOOL
Long and versatile tool designed with two different tip shapes and angles to assist in removing O rings, seals, gaskets, etc., etc. The two sizes cover most applications and allow for a variety of angles and leverage to be achieved. • Length: 295mm • Versatile dual tip design • For O rings, seals & gaskets • Chrome plated • Ergonomic handle.
Leer másUS PRO 24PC METRIC SOCKET BIT SET 1/4″ DRIVE RATCHET WRENCH EXTENSION BAR KIT
A professional quality socket set which contains a wide selection of the most commonly used metric sockets. Manufactured by US.PRO Tools (formerly known as Bergen Tools), one of the more respected hand tool manufacturers on the market. A handy addition to anyones tool collection. Forged from Chrome Vanadium Steel (CR-V) for longevity and durability and helps resist abrasion, oxidation and corrosion. The contents are as follows: 1/4″ Drive 6-Point Socket – Sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm and 13mm. 1/4″ Drive 6-Point Deep Socket – Sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm and 13mm. 1/4″ Drive Universal Joint. 1/4″ Drive Spinner Handle: 6″. 1/4″ Drive Extension Bar: 2″ and 6″. 1/4″ Drive 72T Quick Release Ratchet Handle. Supplied in it’s own handy metal carry case for neat storage and easy transportation.
Leer más40mm Deep Impact Hex Socket 3/4″ Inch Drive 6PT Single Sockets US PRO DD640Z
US PRO DIESEL FUEL INJECTOR SEAL PULLER EXTRACTOR REMOVER GASKET COPPER WASHER
This tool is especially developed to help with the extraction of the copper sealing washers that are used to seal diesel injectors in place where they enter the cylinder head. Often the washer is deep into the cylinder that it makes extraction almost impossible using a pick, that is where this tool excels. It has a tapered and grooved conical tip, enabling it to grip onto the centre of the washer to enable extraction. The sliding weight helps break the washer free. Knurled handle to the top to aid manoeuvrability. The tip diameter is from 4.5mm (approx.) tapering up to 13.2mm (approx.). Total length is 350mm.
Leer más