Waterproof Underwater Glue Epoxy Putty Stick Reinforced Repair Bondloc Aqua
Specifications
| Return Postage Will Be Paid By | Buyer |
| Returns Accepted | Returns Accepted |
| After Receiving The Item, Your Buyer Should Cancel The Purchase Within | 30 days |
| Brand | Bondloc |
| Type | Glue |
| Unit Type | Unit |
| EAN | 5020015000005 |
| Manufacturer Part Number | B2007B-50 |
| Set Or Single Item | Single Item |
| Country/Region Of Manufacture | United Kingdom |
50g Bondloc Aqua Underwater-Reinforced Repair Epoxy Putty StickOur PSAB2003 Bondloc Aqua Plastic Epoxy Putty Stick is a B2007 is a hand-mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. After mixing, it forms a polymer compound that may be applied underwater (either fresh or salt water) and will bond tenaciously to substrates such as: fiberglass, concrete, ceramic, glass, metal, wood, and many plastics.Each epoxy stick contains pre-measured portions of base and activator throughout — no measuring or mixing tools are necessary.The consistency (like modeling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. After 60 minutes the application can be drilled, sawed, sanded, carved, and painted.This Aqua Plastic Epoxy Putty Stick cures to an off-white colour and is suitable for interior or exterior use as it is resistant to: chemicals, water, and temperature extremes.PSAB2007 contains no solvents or VOC, and it is non-flammable, nor releases no noxious fumes. On top of that it won’t shrink or pull away, and the unused portion stays fresh for future use when saved in its original packaging.ApplicationsThis waterproof expox can be used to:Patch dingsHolesGougesRepair decks and hullsPools hot tubs and spasMarine recreational equipmentLeaking gasketsGutters and tanksThis epoxy will also bond to:FiberglassMetalWoodConcreteGlassMany plasticsPSAB2007 works on wet, damp, dry surfaces and underwater.Instructions for useIn order to achieve optimum adhesion, the surface you are applying this epoxy to should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning will also help to ensure a good bond.
