2310 ENGINE CYLINDER HONE – RANGE: 51 – 178MM
Specifications
| Returns Accepted | ReturnsNotAccepted |
| Type | tool |
| Manufacturer Part Number | 2310 |
| Brand | Autopart |
| Warranty | Yes |
| Part Brand | Autopart |
2310 ENGINE CYLINDER HONE - RANGE: 51 - 178MM Resurface cylinder walls so new rings will seatEliminate minor cylinder wall imperfectionsAdjustable diameter and tension settingsFlex shaft will fit variable speed drillMedium grit (220) stonesRange: 51 - 178mmStone Length: 4" / 102mmMADE IN USA Instructions: Insert hone shaft into drill chuck, and tighten chuck. NOTE: Bore may be honed dry or with light oil, but oil is generally recommended. Aerosol-type multi-purpose oil works well. Compress stones so they fit into cylinder, then release.Run drill at slow speed while moving hone in and out of cylinder rapidly. The combustion of drill rpm and stroke speed should be such that honing pattern is a 45 degree angle to bore. CAUTION: Do not push hone so deeply into cylinder that it hits the crankshaft or main bearing webs. Also, do not draw it out or bore past the stones’ pivot point or stones will be damaged. Honing is completed when bore finish is even.Clean bore thoroughly. Use hot water and detergent or motor oil on clean rags. Do not use kerosene or other thin solvents as they will cause the abrasive particles to penetrate into the iron which will accelerate ring wear. Do Not Hesitate To Buy From Us. Just look Our Feedback. If you have any questions: Please feel free to email our customer support. Your satisfaction and feedback are very important to us, so will you PLEASE CONTACT US FIRST BEFORE YOU LEAVE NEGATIVE OR NEUTRAL FEEDBACK. We will do our the best to resolve and rectify any issues with your purchase. It is impossible to address issues if we do not know about them. Thank you. Warranty Policy: Limited Lifetime Warranty! All Commercial products are sold only under the manufacturers original warranty and no other warranty is available or applicable. Products sold are warranted to be free of defect in workmanship or material for the lifetime of product. The remedy for breach of this warranty is limited to the free exchange of the product(s) shown to the manufacturer's satisfaction to be defective. Labor costs are not covered. Liability for neglect, misuse, special, incidental, direct, indirect and consequential damages is specifically disclaimed. The maximum liability is the actual amount charged for parts or services rendered. See return policy if you need a replacement of a part under warranty! Return Policy and cancellations: No returns accepted, only defective exchanges allowed if tested to our satisfaction that item was really defective. We cannot issue return shipping labels. It is the responsibility of the customer to return the part for warranty exchange. How it works: A customer must return the item first with a note specifying the problem. If the item is defective a replacement part will be sent at no additional cost. If a customer needs a replacement part immediately he must prepay the second part with a credit card. A full refund will be issued once the defective part is received. Shipping Policy: All parts are shipped normally within 1 (one) business day. Occasionally shipping may be delayed a few days. Normally the cut off time for in stock parts, same day shipping is 12 noon EST (New York City time). This part will be shipped by US first class mail NOT INSURED with a tracking number in USA or without any tracking number internationally. Insurance is $3.75 additional and must be paid at time of checkout. Delivery is the responsibility of the carrier only. If you require a signature or insurance, you must specifically ask and pay for it when you checkout. The ultimate responsibility to resolve shipping problems though lies within you. We make all necessary precautions to ship the part safely. We are not liable for problems during transit time! Sales Tax: We charge sales tax in the state of Massachusetts only. If tax is not paid at time of checkout a separate invoice will be sent to the customer. We cannot ship the part unless the tax is paid. Miscellaneous: We are not responsible for occasional typographic errors. We leave feedback as soon as feedback is received. This is a terrific item, it is a "must have" for professional mechanics. Buy with confidence from the first business selling automotive tools online since 1994! Thank you for looking!
