Kukko 40mm – 200mm 2 & 3 Arm Bearing Puller Set (Quick Adjust & 2 Jaw Types)
Specifications
| Returns Accepted | ReturnsNotAccepted |
| Brand | Kukko |
| Manufacturer Part Number | K-2030-20+S |
| Country/Region Of Manufacture | Germany |
Be confident in your purchase, we're an Authorized Kukko Dealer! Highlights: Made In Germany.ARMLOCK: The cross-legged jaws guarantee maximum stability for suspending the jaws in the slider.GLIDE & FIX: The improved geometry guarantees quick and easy movement of the jaws on the cross-beam.QUICK ADJUST: The knurls (red knobs) allow the jaws to be quickly released and moved on the cross-beam without the need for tools.Includes standard and narrow jaws. The Kukko 40mm - 200mm 2 & 3 Arm Bearing Puller Set with Quick Adjust & 2 Jaw Types is perfect for pulling off transmission gears, bearings, pinions and synchronizer bodies. Features: This set contains the basic equipment for the 2- and 3-arm pullers needed in every workshop. Additionally the set is now equipped with two pulling hook variants.The extensions included can increase the pullers‘ clamping depth up to max. 600 mm (2-arm puller 600 mm and 3-arm puller 450 mm).Two arm version for space-saving work. Three arms ensure even load distribution for an especially securehold on the part to be pulled.In any position it is used, this model‘s design allows parallel pulling hooks, even under a full load.The part to be pulled lies only on the support surfaces of the pulling hooks and is pulled off gently.The cross-bar of the 2-arm puller has a hexagonal profile, allowing use of a wrench for counterholding, when needed.The spindle heads have a band that prevents the wrench from slipping off during the pulling process.In the approved KUKKO-L-Boxx system. With a new front handle for superior portability.Tipp: The hydraulic spindle 8-01 can be purchased to use the extractor with the standard hooks. Kukko Advantage: Strong construction, high performance and long service life make it ideally suited for use in the commercial vehicle sector.By turning the pulling hooks, the pullers can be used both externally and internally.A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.Turning the pulling hooks enables them to be used both internally and externally.Variable reach thanks to optional jaw extensions. Specs: Spread: 40mm - 200 mm (1 ³⁷/₆₄ -7 7/8 inch) [Note: this is correct, not the image specs] Spread used internal: 100 - 260 mm (3 7/8 - 10 1/4 inch)Depth: 150 - 600 mm (5 7/8 - 23 5/8 inch)Hexagon drive (male): 22 mm (7/8 inch)Maximum load: 10 ton [Note: this is correct, not the image specs] Length of spindle: 355, 220 mm (14, 8 5/8 inch)Maximum torque: 150 Nm (110.5 ft lb)Weight: 12.85 kgNumber of jaws: 3 What's included: (SKU and Item Name) 621220 Mechanical pressure spindle.621355 Mechanical pressure spindle.2-152-P 2 quick adjusting jaws (pair)2-153-P 2 narrow, quick adjusting jaws (pair)2-302-P 2 quick adjusting jaws (pair)2-V-150-P 2 jaw extensions (pair)699915 KUKKO Special grease for pressure spindles20-20-T 2-jaw cross bar30-20-T3 3-jaw cross bar600-17 Pressure pad bricks20-30-T 2-jaw cross barRead Before Buying:-This item is intended for professional technicians. Please make 100% sure this is the item you need before purchasing. -This item is covered under the manufacturers warranty for defects. However, returns (for any reason) are NOT accepted.
